Latest Products https://www.surfacoats.co.in Latest Products Sun, 15 May 2022 14:25:24 +0530 en-us https://www.surfacoats.co.in Surfa Damp Shield Waterproof Coating https://www.surfacoats.co.in/surfa-damp-shield-waterproof-coating.htm https://www.surfacoats.co.in/surfa-damp-shield-waterproof-coating.htm Fri, 01 Apr 2022 00:00:00 +0530 Features and Benefits Formulated for waterproofing protection. Elastomeric properties in the product ensure crack bridging ability. Strong adhesion to masonary substrates. Easy to apply and simple re-coating.   Surface Preparation New masonary surfaces must be allowed to cure completely. Ensure that the surface is thoroughly cleaned and rendered free of dust, oil, grease, grime, loose particles, algae and fungus etc.  Check the substrate for its soundness. Small cracks 3mm or less should be Opened, cleaned and filled with Surfa Crack Filler. Larger Cracks, damaged Portions and hollow areas must be properly repaired.   Application Apply a self priming coat of Surfa Damp Shield (diluted with water 31 ratio). Apply two perpendicular coats of Surfa Damp Shield without dilution. Achieve a forced coverage of 25 sq ft/lit/coat. Allow to dry for 4-6 hours between coats.   On Vertical Area Apply a self priming coat of Surfa Damp Shield (diluted with water in 31 ratio). Apply 1 coat of Surfa Damp Shield without dilution at the rate of 30-35 sq ft/ltr consumption. Apply 2 coats of Surfex Rain Shield-Exterior Emulsion Paint of the desired shade. Allow to dry for 4-6 hours between coats.   On Roofs/Terraces For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket. Surfa Heat Shield Water Based Paint https://www.surfacoats.co.in/surfa-heat-shield-water-based-paint.htm https://www.surfacoats.co.in/surfa-heat-shield-water-based-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Sealer Aear Primer https://www.surfacoats.co.in/surfa-sealer-aear-primer.htm https://www.surfacoats.co.in/surfa-sealer-aear-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Proof LW Integral Liquid Waterproofing Compound https://www.surfacoats.co.in/surfa-proof-lw-integral-liquid-waterproofing-compound.htm https://www.surfacoats.co.in/surfa-proof-lw-integral-liquid-waterproofing-compound.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Proof LW is a specially formulated waterproofing compound made of cement compatible surface plasticizing agents. Enriched with hydrophobic additives which mix readily with water and can be added to concrete, mortars and cement plasters.   Areas of Uses Surfa Proof LW can be used in Basements, Roof Slabs, Water Tanks, External plastering, Balconies and bathroom, Sumps and drains   Features Water Proofing by Filling Pores helps in Reduction of Capillaries Enhances work Ability of mortar Crack Filler Paste https://www.surfacoats.co.in/crack-filler-paste.htm https://www.surfacoats.co.in/crack-filler-paste.htm Fri, 01 Apr 2022 00:00:00 +0530 Based on flexible polymer, the product is designed to fill cracks and holes. Water Based paste form. UV Resistant. Good adhesion, quick drying and smooth filler. Crack Fill Powder https://www.surfacoats.co.in/crack-fill-powder.htm https://www.surfacoats.co.in/crack-fill-powder.htm Fri, 01 Apr 2022 00:00:00 +0530 Water Based product - only water to be added. Suitable for both Interior and Exterior surfaces. Non- shrink property. Surfa Wood Rich PU Exterior Glossy Wood Coating Paint https://www.surfacoats.co.in/surfa-wood-rich-pu-exterior-glossy-wood-coating-paint.htm https://www.surfacoats.co.in/surfa-wood-rich-pu-exterior-glossy-wood-coating-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Wood Rich PU Exterior Matt Wood Coating Paint https://www.surfacoats.co.in/surfa-wood-rich-pu-exterior-matt-wood-coating-paint.htm https://www.surfacoats.co.in/surfa-wood-rich-pu-exterior-matt-wood-coating-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Wall Cure Putty https://www.surfacoats.co.in/surfa-wall-cure-putty.htm https://www.surfacoats.co.in/surfa-wall-cure-putty.htm Fri, 01 Apr 2022 00:00:00 +0530 Unicoat Knifing Paste Filler https://www.surfacoats.co.in/unicoat-knifing-paste-filler.htm https://www.surfacoats.co.in/unicoat-knifing-paste-filler.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Acrylic Wall Putty https://www.surfacoats.co.in/surfa-acrylic-wall-putty.htm https://www.surfacoats.co.in/surfa-acrylic-wall-putty.htm Fri, 01 Apr 2022 00:00:00 +0530 Inex Acrylic Cement Primer https://www.surfacoats.co.in/inex-acrylic-cement-primer.htm https://www.surfacoats.co.in/inex-acrylic-cement-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Benefits Unique 2 in 1 formulation Superior whiteness Alkali resistance Good hiding Excellent coverage No added lead, mercury and chromium Exterior Acrylic Cement Primer https://www.surfacoats.co.in/exterior-acrylic-cement-primer.htm https://www.surfacoats.co.in/exterior-acrylic-cement-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Acrylic Primer - Exterior is an acrylic based product suitable for exterior use. This is a water based thinnable primer and pigmented white to give reasonable opacity. Its sets fast and does not require curing.   Directions for use Surface preparation : Remove dust, dirt, grease and loose flaky paint, fungus/ algae by thorough wire brushing and cleaning with water and allow drying Exterior rough surfaces previously coated with cement paint should be wire brushed and washed with water thoroughly and allowed to dry. Newly plastered surfaces are to be fully cured and dried. Apply single coat liberally using brush and allow drying for 4-6 hours. Apply recommended number of overcoats of smooth emulsion or textured paint. Interior Acrylic Cement Primer https://www.surfacoats.co.in/interior-acrylic-cement-primer.htm https://www.surfacoats.co.in/interior-acrylic-cement-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfalac Cement Primers are excellent Cement primers formulated to resist alkali attack and dampness. These primers may be used on fully matured interior plaster walls as priming coat for any wall coating or synthetic enamel. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour. These primers are fast drying and alkali resistant. These primers are easy to apply by brush and give a smooth matt finish. Surfalac Cement Primer is available in both water and solvent thinnable formulations.   Directions for use Clean the surface thoroughly and make it free from dust, dirt, flakes, grease and other loose particles. Surface should be dry cut with emery paper and cleaned before finishing coats are applied. Apply 1 or 2 coats, as required. Allow at least 6 hrs in between coats. Stir Well Before Use Zinc Chromate Metal Primer https://www.surfacoats.co.in/zinc-chromate-metal-primer.htm https://www.surfacoats.co.in/zinc-chromate-metal-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Provides good adhesion to degreased and pre treated metal surfaces. Paint coating on non-ferrous surfaces shows poor adhesion unless the surface is treated chemically to etch the surface. Direct application of Zinc Chromate Metal Primer also shows satisfactory performance for less critical applications. This primer is also suitable for use in marine condition over steel. Red Oxide Metal Primer https://www.surfacoats.co.in/red-oxide-metal-primer.htm https://www.surfacoats.co.in/red-oxide-metal-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 White Wood Primer https://www.surfacoats.co.in/white-wood-primer.htm https://www.surfacoats.co.in/white-wood-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Ensure that surfaces are thoroughly cleaned and rendered free from dust, dirt, grease, etc. New woodwork: Sand the surface and dust off. Previously painted wood work: Remove flaking and blistering paint. Sand the surface and dust off. Coral Interior Cement Primer https://www.surfacoats.co.in/coral-interior-cement-primer.htm https://www.surfacoats.co.in/coral-interior-cement-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Coral Cement Primers are excellent cement primers formulated to resist alkali attack and dampness. These primers may be used on fully matured interior plaster walls as priming coat for any wall coating or synthetic enamel. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour.   These primers are fast drying and alkali resistant. These primers are easy to apply by brush and give a smooth matt finish. It is available in both water and solvent thinnable formulations.   Cement Primers are formulated to resist alkali attack and dampness. These primers may be used on fully matured interior plaster walls as priming coat for any wall coating or synthetic enamel. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour. These primers are fast drying and alkali resistant. These primers are easy to apply by brush and give a smooth matt finish. Cement Primer is available in both water and solvent thinnable formulations. Coral Exterior Cement Primer https://www.surfacoats.co.in/coral-exterior-cement-primer.htm https://www.surfacoats.co.in/coral-exterior-cement-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Coral Acrylic Exterior Cement Primer is an acrylic based product suitable for exterior use. This is a water based thinnable primer and pigmented white to give reasonable opacity. Its sets fast and does not require curing.   Directions for use Surface preparation: Remove dust, dirt, grease and loose flaky paint, fungus/ algae by thorough wire brushing and cleaning with water and allow drying. Exterior rough surfaces previously coated with cement paint should be wire brushed and washed with water thoroughly and allowed to dry. Newly plastered surfaces are to be fully cured and dried. Apply single coat liberally using brush and allow drying for 4-6 hours. Apply recommended number of overcoats of smooth emulsion or textured paint. Zinc Phosphate Grey Primer https://www.surfacoats.co.in/zinc-phosphate-grey-primer.htm https://www.surfacoats.co.in/zinc-phosphate-grey-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Steel Surface : Degrease the surface and remove the dirt and loose particles by wire brush or using mechanical tools to render the surface smooth bare metal, Surface should be absolutely clean and dry before applying Zinc Phosphate Grey Primer. Universal White Primer https://www.surfacoats.co.in/universal-white-primer.htm https://www.surfacoats.co.in/universal-white-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Walltek Primer Plaster Putty https://www.surfacoats.co.in/walltek-primer-plaster-putty.htm https://www.surfacoats.co.in/walltek-primer-plaster-putty.htm Fri, 01 Apr 2022 00:00:00 +0530 Walltek Primer Plaster affords an ideal treatment for interior concrete/mortar walls and ceilings. It is an aqueous acrylic based, economical, eco-friendly and durable plaster which, not only, conceals the defects, hairline cracks and imperfections in plastered wall surfaces, but also, provides water and damp resistant smooth coating. Walltek Primer Plaster is compatible with any kind of water based paint over coatings When Surfa Walltek Primer Plaster is applied on concrete surface, the surface will be rendered smooth. On such surfaces, any water based paint can be applied directly. Walltek Primer Plaster is not suitable for application on lime rendered surfaces. Galaxy Luxury Interior Emulsion Paint https://www.surfacoats.co.in/galaxy-luxury-interior-emulsion-paint.htm https://www.surfacoats.co.in/galaxy-luxury-interior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surface Preparation Clean the surface thoroughly, sand with Emery Paper 180 to render surface free of loose particles, flakes, dust, dirt, oil, grease etc. and wipe clean. Ensure there is no fungus or moisture on the wall. On well dried and cleaned surface, apply a coat of Surfa Acrylic Cement Primer-Interior Water Based and allow to it dry for 6-8 hours. Rectify the undulation. Smoothen the surface by filling dents/cracks with thin coat of Surfa Acrylic Wall Putty and allow it to dry for minimum 6-8 hrs. Sand the surface with Emery Paper 180 and wipe it clean. Apply second coat of Surfa Acrylic Cement Primer-Interior-Water Based and allow it to dry for 6-8 hrs. Sand the surface with Emery Paper 320 and wipe it clean.   Application On well dried, cleaned, puttied and primed surface, apply 2/3 coats of surfa Galaxy- Luxury Emulsion thinned with 400ml of clean potable/municipal water for one litre of paint. Leave a gap of 4-6 hours between coats. Apply the paint by Brush/Roller or Spray. Dark shades may require additional coat for proper hiding. Do not apply surfa galaxy luxry emulsion Directly over putty as that would lead to patchy appreance For Base White Tinting if required, Must Be Done Before Thinning Do not over thin Stir Well and Strain Before use Removal of Stains/Dirt: To remove dirt/stains from painted walls, wash with water/mild soap solution (avoid detergents), after one month of painting (minimum). Tips Wipe the affected area with a clean and dry cloth to remove solid particles from the wall. For regular household stains like pencils, tea, coffee, etc., use 5% soap solution. For stains like turmeric, sketch pen, etc., use a mild dish wash solution (e.g. Pril vim liquid etc). For tough stains like pickle, shoe polish, crayons, oil etc., wipe the surface gently with sponge soaked with Mineral Terpentine. Do not use Liquid Bleach to remove stains. Use a soft cloth or sponge soaked with soap solution to remove stains- rubbing gently in a circular motion. Then, immediately wipe it with water using clean sponge to prevent stains from spreading. Once the stain is removed, wipe the wall with a clean dry cloth.   Safety, Health & Environmental Information Keep out of reach of children and away from food, drink and animal feed. Apply in well ventilated areas. Do not breathe vapour or spray. Do not pour leftover paint down drains or in water courses. Contain spillage using sand or earth. Store container in an upright position with light tightly closed, in a cool and dry place. (Information in this leaflet is given in good faith but without warranty) Classic Luxury Interior Emulsion Paint https://www.surfacoats.co.in/classic-luxury-interior-emulsion-paint.htm https://www.surfacoats.co.in/classic-luxury-interior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Easy Wash Premium Interior Emulsion Paint https://www.surfacoats.co.in/easy-wash-premium-interior-emulsion-paint.htm https://www.surfacoats.co.in/easy-wash-premium-interior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surface preparation Clean the surface thoroughly, sand the surface with Emery Paper 180 rendering it free from previous paint coatings, flaking, loose particles, dust, dirt, oil, grease, grime etc. and wipe it clean.   Directions for use On well dried and cleaned surface, apply a coat of Surfa Water Based Acrylic Cement Primer and allow drying for 6-8 hours. Rectify the undulations and smoothen the surface by applying thin coats of Surfa Acrylic Wall Putty allowing it to dry for 6-8 hours. Sand the surface with Emery Paper 320 and wipe it clean. Do not apply easy wash- premium emulsion directly over putty as that would lead to patchy appearance. On primed and puttied surface, apply 2 or 3 coats of EASY WASH Premium Emulsion thinned with 450/500ml of clean potable water for 1 liter of paint. Leave a gap of 3-4 hours between coats. To remove dirt, stain, from painted walls wash with water / mild soap solution (avoid detergent), after one month of painting. For base white, tinting if required must be done before thinning. Do not over thin. Stir well and strain before use. Contains no added lead, mercury or chromium compounds. Stir well and strain before use. (Information in this leaflet is given in good faith but without warranty).   Safety, health & environmental solution Keep out of reach of children and away from food, drink and animal feed. Apply in well ventilated areas. Do not breathe vapour or spray. Do not pour leftover paint down drains or in water courses. Contain spillage using sand or earth. Store container in an upright position with lid tightly closed, in a cool and dry place. Supreme Plastic Acrylic Emulsion Paint https://www.surfacoats.co.in/supreme-plastic-acrylic-emulsion-paint.htm https://www.surfacoats.co.in/supreme-plastic-acrylic-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Pearl Glow Metallic Finish Acrylic Emulsion Paint https://www.surfacoats.co.in/pearl-glow-metallic-finish-acrylic-emulsion-paint.htm https://www.surfacoats.co.in/pearl-glow-metallic-finish-acrylic-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Pearl Glow Metallic Finish Acrylic Emulsion Paint is a premium water based acrylic emulsion that provides luxurious and pearl glow metallic finish to the surface. Pearl Glow Premium Acrylic Emulsion - Metallic Finish can be applied on interior and exterior walls, ceilings, columns and paintable wall coverings. It can be applied on stucco, asbestos and wooden surfaces. This is a water based and non-hazardous paint, free from toxic ingredients, lead, mercury, etc.   Surface preparation Clean the surface thoroughly to render the surface free of previous paint coatings, loose particles, flaking, dust, dirt, oil, grease, etc., and wipe clean.   Directions for use On well dried and cleaned surface apply a coat of appropriate Surfalac Primer, depending on the surface and allow drying for 6-8 hours Smoothen the surface by filling dents with thin coat of appropriate Surfalac Putty, depending on the surface and allow drying for minimum 8 hours For painting interior walls follow the standard procedure/practice applicable to premium emulsion. Rectify the undulations and sand the surface with Emery Paper 180 and wipe clean Apply second coat of appropriate Surfalac Primer and allow it to dry for 6-8 hours. Sand the surface with Emery 320 grade and wipe clean Apply a coat of Surfa Acrylic Emulsion thinning 1 liter of paint with 450-500 ml of clean potable water as a base coat and allow drying for 5-6 hours Apply 2-3 coats (as required) of Pearl Glow Metallic Finish thinning with 5-10% of clean potable water Apply with brush followed by roller application allowing 4-6 hours interval between coats For Designer Pattern/Finish transfer the paint to roller tray and apply one coat followed by an appropriate tool to create the desired design effect/pattern finish   Other information Clean-up: Clean brushes, rollers and tools with warm soap water immediately after use Storage: Close tightly the container when not in use. Do not reuse the containers. Dispose of empty containers Acrylic Distemper Paint https://www.surfacoats.co.in/acrylic-distemper-paint.htm https://www.surfacoats.co.in/acrylic-distemper-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Acrylic Distemper combines the economic advantages of distemper with the time tested performance of co-polymer emulsions.  Salient features of this product are excellent cleanliness of shades and a relatively shorter recoatability period of hours. Successive coats can be applied in shorter intervals.  Acrylic Distemper is washable 7 days after application.  The original brightness and beauty can be regained by wiping the entire surface with a mild solution of soap and water.  The product is available in 36 beautiful standard shades. Made with eco-friendly water based technology. One Coat Premium Interior Emulsion Paint https://www.surfacoats.co.in/one-coat-premium-interior-emulsion-paint.htm https://www.surfacoats.co.in/one-coat-premium-interior-emulsion-paint.htm Wed, 09 Feb 2022 00:00:00 +0530 Flat Oil Matt Interior Emulsion Paint https://www.surfacoats.co.in/flat-oil-matt-interior-emulsion-paint.htm https://www.surfacoats.co.in/flat-oil-matt-interior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Flat Oil Matt Interior Wall Finish is a durable matt finish paint for walls and ceilings. An easily applied interiors wall coating which dries to a pleasant velvet matt finish. The dried film provides a hard wearing surface. It can be regularly cleaned without detriment to its appearance. The matt finish is useful in minimizing the uneven appearance of wall surfaces and ceilings. Super Shine Acrylic Emulsion Paint https://www.surfacoats.co.in/super-shine-acrylic-emulsion-paint.htm https://www.surfacoats.co.in/super-shine-acrylic-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Spectra Motion Interior Paint https://www.surfacoats.co.in/spectra-motion-interior-paint.htm https://www.surfacoats.co.in/spectra-motion-interior-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Spectra Motion technology Patented technology used Easy application Ready to use product Single coat application Versatile product - Multiple uses APEO and Formaldehyde- free Industrial Aluminium Paint https://www.surfacoats.co.in/industrial-aluminium-paint.htm https://www.surfacoats.co.in/industrial-aluminium-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Area of Application Application on metals for anti-corrosive coating for all types of structural steel, metal sheets, bridges, oil/petrol storage tanks, transformers and lamp posts. (Can be augmented with solid colours to polychromatic metal finish). Clean the surface thoroughly to be free from dirt, oil, grease etc., by blast cleaning conforming to Sa 2.5. A coat of appropriate primer is recommended.   Mixing Component "A" - Medium. Component "B" - Non-leafing aluminums paste. Mix 10 gms aluminium paste (Component B) in 90 ml of medium (Component A) to make 100 ml of aluminium paste standard paint. Maintain above ratio for good performance. Mix thoroughly for 10-15 minutes prior to use. Add GP Thinner is required.   Application Apply 2 coats by brush or spray allowing 12 hours (preferably overnight) interval between coats.   General Recommendations Keep Container tightly closed & not easily reach to children When applying, it is advisable to use proper protective equipment Harmful if swallowed, seek medical assistance Flammable material Store in cool ventilated place Industrial Epoxy Coating Paint https://www.surfacoats.co.in/industrial-epoxy-coating-paint.htm https://www.surfacoats.co.in/industrial-epoxy-coating-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Areas of Application Ideal for application on metals for anti-Corrosive coating with high wear and abrasion resistance.   Surface Preparation New Steel: Recommended abrasive blasting Sa 2.5 after degreasing and de-oiling of the surface. If steel is coated by primer clean the surface from oil, grease, dirt and moisture and any other foreign matter.   Maintenance Remove oil, grease, dirt etc., with a detergent wash. Remove salty and other contaminants by high-pressure fresh water Ultra Shield Exterior Wall Paint https://www.surfacoats.co.in/ultra-shield-exterior-wall-paint.htm https://www.surfacoats.co.in/ultra-shield-exterior-wall-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Product is unique - High Build Film Coating (DFT-100-150 microns) Good UV Resistance properties. Good adhesion with Anti  Carbonation, Anti - fungal and Anti - algae properties. Good Elongation with crack bridging properties. (1-1.5mm) Elastic and able to accommodate substrate and crack movements. Waterproofing with chemistry of balance elongation and tensile strength. Highly Durable coating staying colour fast season after season. Surfex Rain Shield Exterior Emulsion Paint https://www.surfacoats.co.in/surfex-rain-shield-exterior-emulsion-paint.htm https://www.surfacoats.co.in/surfex-rain-shield-exterior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surface preparation Newly plastered wall must be allowed to cure for minimum 3 months before painting. The surface must be free from dirt, dust and grease Remove all loose flaked coatings/particles or powder residue by thorough brushing and scrapping followed by water jetting, if required. Ensure removal of fungus and algae growth with suitable biocide treatment. Ensure that walls are completely dry before painting. Ensure that all water leakages and seepages are stopped completely before painting. Undulation to be rectified. Holes, dents and cracks are to be filled with exterior putty or sand mortar that is a mixture of White Cement & fine sand in the ratio of 1:3.   Priming A base coat of Surfa Acrylic Exterior Cement Primer (WB) is mandatory to prevent failure of a paint film.   Application On well cured, dried and cleaned plastered walls, apply one coat of Surfa Acrylic Exterior Cement Primer (Water Based) diluting 1 litre of primer with 500ml of clean potable water and allow drying for 5-6 hrs. Apply two coats of Surfex Rain Shield-diluting 1 litre of paint with 400ml of clean potable water. Allow a minimum interval of 5-6 hrs between coats. On horizontal surfaces like tops of parapets and awnings, it is necessary to apply 3 coats. Deep shades like Sunrise, Ming Red, Flamingo, Dark Micado, Terracotta, etc. require additional coats.   Precautions Surfex Rain Shield is not suitable for painting on damp surfaces or where there is a continuous seepage of water. Do not apply the paint at temperatures below 10ºC or above 40ºC. Use only exterior putty and an exterior primer on exterior walls. The paint should not be applied on surfaces/substrates which are subjected to continuous seepages or dampness. Application of Exterior Wall Primer is compulsory for all surfaces. Not doing so, can lead to failure of the paint film. Do not dilute the paint. Over dilution of SURFEX Rain Shield may result in shade variation, poor hiding, poor bonding and flaking.   Safety Information Fire Hazard Class: Non- flammable   Safety Precautions Non- flammable. Keep out of reach of children. Do not breathe vapour. Protect the eyes. Avoid contact with Skin. Recommended to wear protective clothing like gloves, overall etc. Contain spillage using sand or earth. No added Lead, Mercury or Chromium Compounds. Do not pour left over paint down drains or in water courses. To remove splashed paint fallen on glass, ceramic, clinkers, natural stone, metal/wood surfaces, rinse with plenty of water immediately without allowing the paint to dry. Surfex Dust Shield Acrylic Exterior Emulsion Paint https://www.surfacoats.co.in/surfex-dust-shield-acrylic-exterior-emulsion-paint.htm https://www.surfacoats.co.in/surfex-dust-shield-acrylic-exterior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfex Premium Pure Acrylic Exterior Emulsion Paint https://www.surfacoats.co.in/surfex-premium-pure-acrylic-exterior-emulsion-paint.htm https://www.surfacoats.co.in/surfex-premium-pure-acrylic-exterior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Directions for use Prepare wall surface by scraping off flaked coatings and ensure removal of fungus and algae growth with suitable biocide treatment. The surface must be free from loose particles, dirt, dust, grease and moisture. Take maximum precautions where the water tends to accumulate, i.e., places like parapet,sunshade, etc. The exterior surface should be free from seepage and constant dampness. During the rainyreason allow 2-3 days of sunshine for surface to dry before starting painting. Newly plastered walls must be allowed to cure for 6 months before painting. To 1 litre of Surfex add 400 ml of clean potable water. For best results, apply 2 coats. Between coats, allow minimum of 4 hours gap. On sensitive areas like parapets and awnings, an extra coat is recommended. On a freshly plastered surface, 3 coats of Surfex are necessary. Apply the first coat by diluting one litre of Surfex with one litre of clean water.This coat acts as a primer coat. The other coats are to be applied by diluting with 400 ml of clean potable water per litre.   Precautions Do not apply putty or cement primers on exterior walls. Cracks can be filled with white cement or mixture of cement and sand, if necessary. Do not over thin the paint. Over dilution of Surfex Premium may result in shade variation, poor hiding, poor bonding and flaking. Do not use any universal stainers or other colourants. Advanced Surface Acrylic Exterior Emulsion Paint https://www.surfacoats.co.in/advanced-surface-acrylic-exterior-emulsion-paint.htm https://www.surfacoats.co.in/advanced-surface-acrylic-exterior-emulsion-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Tile Guard Acrylic Paint https://www.surfacoats.co.in/surfa-tile-guard-acrylic-paint.htm https://www.surfacoats.co.in/surfa-tile-guard-acrylic-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surface Preparation New surfaces must be allowed to dry out completely. Surface must be thoroughly clean and free from dust, flakes, and grease etc.   Old and pre-painted surfaces Remove all loosely adhering particles, powdery materials, and defective paints by brushing, scraping and water jetting. Clean fungus affected area by proper Biocide treatment.   Precaution Do not apply paint during wet weather. Do not over thin the paint or over extend the brush. Do not use any Universal Stainer or other Colourants.   Select Direct Shade Offered by Manufacturers Do not apply paint on damp tiles. For best performance of the paint, ensure proper cleaning and washing of dirt, black patches etc., with water at regular intervals of six months. Stir Well Before Use Surfa Floor Coat PU Acrylic Based Paint https://www.surfacoats.co.in/surfa-floor-coat-pu-acrylic-based-paint.htm https://www.surfacoats.co.in/surfa-floor-coat-pu-acrylic-based-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfacem Waterproof Cement Paint https://www.surfacoats.co.in/surfacem-waterproof-cement-paint.htm https://www.surfacoats.co.in/surfacem-waterproof-cement-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Protects as it decorates Gives building surfaces a new lease of life. Supplied in fine powder form and is based on the best quality White Cement. Easy to mix. Forms an integral part of the surface and gets harder with age. Resists moisture penetration because of its greater water repelling property and “breathes” which is essential for exterior walls. Hygienic and an excellent light reflector. Withstands changing climatic condition. Does not rub, flake or peel off, when correctly applied to a surface and is washable. Has longer pot life and better obliterating power. Made up of finest raw materials available, under care and supervision at every stage of manufacture. Can be brushed or sprayed. Confirms to B.I.S Specifications IS: 5410-2013. Available in 31 standard shades. Dark shades are not recommended for large unrelieved areas. Surfatex Matt Exquisite Exterior Texture Paint https://www.surfacoats.co.in/surfatex-matt-exquisite-exterior-texture-paint.htm https://www.surfacoats.co.in/surfatex-matt-exquisite-exterior-texture-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfatex Matt gives really beautiful texture and is tough, since it contains mica, granite and potent biocide. All these act as a ‘powerful coat of armour’ against the harsh conditions of the tropical climate, industrial towns and coastal cities. Surfatex Matt, an exquisite long-life sand textured paint made to the highest standards. Surfatex Matt can be used both for exteriors as well as interiors Surfatex Matt also ‘breathes’ and therefore does not crack. This is because the exclusive resin binder with high adhesive properties gives it the flexibility to expand/contract with the changing temperature and thus bridges hair line cracks. In addition, it contains titanium dioxide which provides greater opacity, a rich and thick coating of reinforced toughness, weather-resistance, durability and no peeling. Ideal For Exteriors As Well As Interiors: All these unique features not only make Surfatex Matt a perfect paint for outside walls, but also, a perfect texture for inside walls with luxurious, ribbed, flowing textures assorted and patterned finishes. Surfa Nova Texture Wall Finish Paint https://www.surfacoats.co.in/surfa-nova-texture-wall-finish-paint.htm https://www.surfacoats.co.in/surfa-nova-texture-wall-finish-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 An acrylic based decorative textured coating for exteriors and interiors, applied by trowel. It forms recessed textures, curved or linear. In different directions controlled by the trowel movement. Depending on the groove depth required, it is available in fine and coarse textures.   Composition Precisely graded fillers of quartz, aggregates and good quality extenders in a co-polymer emulsion with special additives.   Areas of Use It is primarily designed for use on interior and exterior facades of residential, commercial and office complexes. It is suitable for direct application on almost all surfaces such as sand faced plaster, wood and plywood. Aqua Semi Gloss Enamel Paint https://www.surfacoats.co.in/aqua-semi-gloss-enamel-paint.htm https://www.surfacoats.co.in/aqua-semi-gloss-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Low odour Excellent hiding levelling Semi gloss finish Water based enamel, quick drying Washable - easy cleaning No added lead, mercury & chromium Satin Finish Soft Sheen Premium Enamel Paint https://www.surfacoats.co.in/satin-finish-soft-sheen-premium-enamel-paint.htm https://www.surfacoats.co.in/satin-finish-soft-sheen-premium-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Features This is modern Satin finish enamel recommended for exterior and interior use. It has an extremely tough and durable film which withstands severe weather conditions. Surfa Satin Finish is ideal for protection and decoration of metal and wood surfaces. It dries within 4-5 hours by giving an extremely rich attractive satin finish.   Benefits Rich finish Stain resistance Highly washable   Coverage 100 to 130 square feet / Litre per coat (at 15 to 18 microns dry film thickness). 60 to 80 square feet / Litre for 2 coats (at 24 to 28 microns Dry film thickness). Emerald Premium High Gloss Enamel Paint https://www.surfacoats.co.in/emerald-premium-high-gloss-enamel-paint.htm https://www.surfacoats.co.in/emerald-premium-high-gloss-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Emerald Premium High Gloss Enamel Paint is specially formulated with high opacity and light fast pigments to produce a durable, high gloss protective coating of outstanding quality. It is recommended for all interiors and exterior surfaces – properly primed and under coated, where a high standard of durability and protection is required. It is extensively used and recommended for finishing doors & windows, furniture & fixtures, hoardings, signboards, trucks, transport coaches, machinery and equipment and variety of other articles. Surfa Emerald Synthetic Enamel Super-White is a specially formulated shade for exclusive use for doors and windows, fixtures, furniture, etc. Its whiteness retention property is excellent. Surfa Emerald Synthetic Enamel has such excellent flow and leveling properties that it is difficult to distinguish a brushed surface from a sprayed surface. Its brushability is excellent.   Benefits Superior high gloss Tough film Highly washable Coral Synthetic Enamel Paint https://www.surfacoats.co.in/coral-synthetic-enamel-paint.htm https://www.surfacoats.co.in/coral-synthetic-enamel-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Benefits Value for money Smooth and glossy finish Good and clean shades   Coverage 10-13 square meter / Litre per coat. (at 13-18 microns dry film thickness) 6-8 square meter / Litre for 2 coats* (at 23-16 microns dry film thickness) Floor Coat Enamel Paint https://www.surfacoats.co.in/floor-coat-enamel-paint.htm https://www.surfacoats.co.in/floor-coat-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Benefits Value for money Tough film Smooth and glossy finish Abrasion resistance Oil Based Synthetic Enamel Paint https://www.surfacoats.co.in/oil-based-synthetic-enamel-paint.htm https://www.surfacoats.co.in/oil-based-synthetic-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Directions for Use Clean the surface thoroughly freeing it from dust, dirt, oil, grease & loose particles. Surface must be free from moisture.   Benefits Value for money Matt finish Excellent flow hardness Fast drying Hammertone Finish Enamel Paint https://www.surfacoats.co.in/hammertone-finish-enamel-paint.htm https://www.surfacoats.co.in/hammertone-finish-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Features This is modern Hammertone finish enamel recommended for exterior and interior use.  It has an extremely tough and durable film which withstands severe weather conditions. Hammertone Finish is ideal for protection and decoration of metal and wood surfaces.  It dries within 4-5 hours by giving an extremely rich attractive satin finish. Hammertone Finish is available in Air Drying and Stoving qualities.  The paint when sprayed evenly yields a fancy finish of uniform and attractive hammer pattern.  The film sets to give a tough and glossy finish having lasting protective and decorative properties.  The paint is to be applied by spraying only. Synthetic Clear Varnish Enamel Paint https://www.surfacoats.co.in/synthetic-clear-varnish-enamel-paint.htm https://www.surfacoats.co.in/synthetic-clear-varnish-enamel-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 INEX Ceiling Paint https://www.surfacoats.co.in/inex-ceiling-paint.htm https://www.surfacoats.co.in/inex-ceiling-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Brilliant White Acrylic Ceiling Paint https://www.surfacoats.co.in/brilliant-white-acrylic-ceiling-paint.htm https://www.surfacoats.co.in/brilliant-white-acrylic-ceiling-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Build Care Damp Prime Waterproof Coating https://www.surfacoats.co.in/build-care-damp-prime-waterproof-coating.htm https://www.surfacoats.co.in/build-care-damp-prime-waterproof-coating.htm Fri, 01 Apr 2022 00:00:00 +0530 Features & Benefits Mastic waterproofing coating Good adhesion with Anti-fungal properties. Easy to apply- By Brush/Roller. Crack bridging ability (up to 0.5mm). Water proofing up to 3 Bars of positive pressure on vertical surfaces and 5 bars of positive pressure on horizontal surfaces. Surfa Acryl Water Repellent Decorative Coating Paint https://www.surfacoats.co.in/surfa-acryl-water-repellent-decorative-coating-paint.htm https://www.surfacoats.co.in/surfa-acryl-water-repellent-decorative-coating-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Surefiller Expansion Filler https://www.surfacoats.co.in/surefiller-expansion-filler.htm https://www.surfacoats.co.in/surefiller-expansion-filler.htm Fri, 01 Apr 2022 00:00:00 +0530 MIXING INSTRUCTIONS Add powder to water (not vice versa) till you get a thick homogenous paste suitable for application. (Apprx. proportion-1 volume of water :3 volumes of powder). Use only potable water.   FILLING Large and small cracks or crevices in walls, floors, ceilings. Gaps around sinks, water pipes, baths, tiling and nail holes. Splits, knot-holes, imperfection in wood works, joints in boards and paneling. Holes and cracks in furniture.   FIXING  New tiling Loose tiles   Screws and nails on walls and all types of fixtures on walls and ceilings. LEVELING Grain in hard wood before varnishing or polishing undulated rough surfaces. GLAZING PUTTY   Makes an ideal putty which will not crack or fall off. OTHER USES SUREFILLER can be used for repairing, moulding, making moulds and even for sculptures and casts, Surfacrete SBR Construction Chemical https://www.surfacoats.co.in/surfacrete-sbr-construction-chemical.htm https://www.surfacoats.co.in/surfacrete-sbr-construction-chemical.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Nova Luxury Texture Stone Finish Paint https://www.surfacoats.co.in/surfa-nova-luxury-texture-stone-finish-paint.htm https://www.surfacoats.co.in/surfa-nova-luxury-texture-stone-finish-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Composition Precisely graded fillers of quartz, aggregates and good quality extenders in a co-polymer emulsion with special additives.   Areas of Use It is primarily designed for use on interior and exterior facades of residential, Commercial and office complexes. It is suitable for direct applications on almost all surfaces and faced plaster, wood and plywood. ProKoat Heavy Duty Protective Coating https://www.surfacoats.co.in/prokoat-heavy-duty-protective-coating.htm https://www.surfacoats.co.in/prokoat-heavy-duty-protective-coating.htm Fri, 01 Apr 2022 00:00:00 +0530 Easy application 5-year protection warranty Provides a tough durable protective coating with a sheen Gives a natural aesthetic look of the previous surface Water-based and Eco-friendly Wood White Primer https://www.surfacoats.co.in/wood-white-primer.htm https://www.surfacoats.co.in/wood-white-primer.htm Fri, 01 Apr 2022 00:00:00 +0530 Surfa Wood Rich NC Sanding Sealer Paint https://www.surfacoats.co.in/surfa-wood-rich-nc-sanding-sealer-paint.htm https://www.surfacoats.co.in/surfa-wood-rich-nc-sanding-sealer-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Method of Application   Surface Cleaning: For Pre-Polished Wood: Remove all existing coatings by sanding or scraping For New Wood: Wooden surfaces to be sanded by using emery paper No.180 followed by 320. Clean the surface free of dust particles by wiping off. If necessary, remove dust and grease using a cloth soaked in Surfa D13 N.C thinner or equivalent. Under Coat:  To fill minor pores, apply Surfa N.C Wood filler using a putty knife or muslin cloth and remove excess coating. Sand the coat after 1 hour with emery paper No.240 and wipe clean.   To Seal the surface: Thin Surfa N.C Sanding Sealer with 100 parts of Surfa D13 N.C thinner for padding or 150 parts for spray. Permit 1 hour interval between successive coats. Use emery paper 240/320 to scrub leftover coats. Apply minimum 2 coats for better sealing.   Top Coat: For Top coat, use one of the following products Surfa 1K Acrylic Clear Matt/glossy or Surfa NC Cabinet Clear or Surfa Wood Shield- Glossy (PU based).   Apply the products strictly as per following directions For Surfa 1K Acrylic Clear Matt on filled wood: Apply 3 coats of Matt. For Surfa 1K Acrylic Clear Glossy use 2 coats of Matt and 2 coats of Glossy. To dilute Surfa 1K Acrylic Clear use 40-50 parts of Surfa NC Thinner SP 58. For Surfa N C Cabinet Clear Glossy/Matt: Thin with 50 parts of Surfa N C Thinner SP50. Apply minimum 2 coats by spray for better result. Further coats can be applied, if more gloss is required. Allow minimum 2 hours interval between successive coats. Use emery paper No 400/600 between coats. For Surfa Wood Shield Interior Glossy (PU Based): Thin with for brushing add 10% of Thinner  14 or Enamel Thinner 600 and mix well. For spraying add 20% of Thinner 14 or Enamel Thinner 600 and mix well. Apply 2 coats of thinned Wood Shield Interior Glossy by brush or spray allowing 12 hours drying time between coats. Wood Shield Interior Glossy Paint https://www.surfacoats.co.in/wood-shield-interior-glossy-paint.htm https://www.surfacoats.co.in/wood-shield-interior-glossy-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Application This clear coating gives excellent finish on wooden surfaces and providestough, clear and durable finish with good flow and leveling properties. Wood Rich Premium Exterior Wood Finish Paint https://www.surfacoats.co.in/wood-rich-premium-exterior-wood-finish-paint.htm https://www.surfacoats.co.in/wood-rich-premium-exterior-wood-finish-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Long life without yellowing & chalking. Suitable over any wood or wood substitute e.g. Veneer, MDF & other absorbent wood surfaces with equal efficiency, Physical & Chemical resistance in conformity with DIN 68861  IB. Exterior application over light, medium & dark coloured wood. Available in various sheen level. Mirror like gloss Wood Rich Premium Interior Wood Finish Paint https://www.surfacoats.co.in/wood-rich-premium-interior-wood-finish-paint.htm https://www.surfacoats.co.in/wood-rich-premium-interior-wood-finish-paint.htm Fri, 01 Apr 2022 00:00:00 +0530 Quicker drying & superior block resistance hence increased production output. Suitable over any wood, wood substitute e.g Veneer, MDF & other absorbent wood surfaces with equal efficiency. Chemical (water, oil, dirt, grease, ink, mild acid & alkali) & Mechanical resistance (DIN 68861-1B) Cement Primer https://www.surfacoats.co.in/cement-primer.htm https://www.surfacoats.co.in/cement-primer.htm Tue, 08 Feb 2022 00:00:00 +0530 Enamel Paint https://www.surfacoats.co.in/enamel-paint.htm https://www.surfacoats.co.in/enamel-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Exterior Paint https://www.surfacoats.co.in/exterior-paint.htm https://www.surfacoats.co.in/exterior-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Interior Paint https://www.surfacoats.co.in/interior-paint.htm https://www.surfacoats.co.in/interior-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Texture Paint https://www.surfacoats.co.in/texture-paint.htm https://www.surfacoats.co.in/texture-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Ceiling Paint https://www.surfacoats.co.in/ceiling-paint.htm https://www.surfacoats.co.in/ceiling-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Wall Putty https://www.surfacoats.co.in/wall-putty.htm https://www.surfacoats.co.in/wall-putty.htm Tue, 08 Feb 2022 00:00:00 +0530 Waterproof Coating https://www.surfacoats.co.in/waterproof-coating.htm https://www.surfacoats.co.in/waterproof-coating.htm Tue, 08 Feb 2022 00:00:00 +0530 Primer Paint https://www.surfacoats.co.in/primer-paint.htm https://www.surfacoats.co.in/primer-paint.htm Tue, 08 Feb 2022 00:00:00 +0530 Wood Coating https://www.surfacoats.co.in/wood-coating.htm https://www.surfacoats.co.in/wood-coating.htm Tue, 08 Feb 2022 00:00:00 +0530 Allied Products https://www.surfacoats.co.in/allied-products.htm https://www.surfacoats.co.in/allied-products.htm Tue, 08 Feb 2022 00:00:00 +0530