Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

Need Help? Chat with us

Pearl Glow Metallic Finish Acrylic Emulsion Paint

Pearl Glow Metallic Finish Acrylic Emulsion Paint

MOQ : 100 Litre

Business Type Manufacturer, Supplier, Distributor
Application Brush, Roller
Packaging Type Buckets
Brand Name Surfa
Click to view more

Preferred Buyer From

Location Anywhere in India

Product Details

Spreading capacity
65-70 square feet / Litre for 2 coats
Paint Type
Paint Base Type
Water Based Paint
Metallic Finish
  • Pearl Glow Metallic Finish Acrylic Emulsion Paint is a premium water based acrylic emulsion that provides luxurious and pearl glow metallic finish to the surface.
  • Pearl Glow Premium Acrylic Emulsion - Metallic Finish can be applied on interior and exterior walls, ceilings, columns and paintable wall coverings. It can be applied on stucco, asbestos and wooden surfaces.
  • This is a water based and non-hazardous paint, free from toxic ingredients, lead, mercury, etc.


Surface preparation

Clean the surface thoroughly to render the surface free of previous paint coatings, loose particles, flaking, dust, dirt, oil, grease, etc., and wipe clean.


Directions for use

  • On well dried and cleaned surface apply a coat of appropriate Surfalac Primer, depending on the surface and allow drying for 6-8 hours
  • Smoothen the surface by filling dents with thin coat of appropriate Surfalac Putty, depending on the surface and allow drying for minimum 8 hours
  • For painting interior walls follow the standard procedure/practice applicable to premium emulsion. Rectify the undulations and sand the surface with Emery Paper 180 and wipe clean
  • Apply second coat of appropriate Surfalac Primer and allow it to dry for 6-8 hours. Sand the surface with Emery 320 grade and wipe clean
  • Apply a coat of Surfa Acrylic Emulsion thinning 1 liter of paint with 450-500 ml of clean potable water as a base coat and allow drying for 5-6 hours
  • Apply 2-3 coats (as required) of Pearl Glow Metallic Finish thinning with 5-10% of clean potable water
  • Apply with brush followed by roller application allowing 4-6 hours interval between coats
  • For Designer Pattern/Finish transfer the paint to roller tray and apply one coat followed by an appropriate tool to create the desired design effect/pattern finish


Other information

  • Clean-up: Clean brushes, rollers and tools with warm soap water immediately after use
  • Storage: Close tightly the container when not in use. Do not reuse the containers. Dispose of empty containers

Yes! I am interested

Looking for "Pearl Glow Metallic Finish Acrylic Emulsion Paint" ?

200 ML-20 LTR

Explore More Products