Industrial Aluminium Paint

Area of Application

• Application on metals for anti-corrosive coating for all types of structural steel, metal sheets, bridges, oil/petrol storage tanks, transformers and lamp posts. (Can be augmented with solid colours to polychromatic metal finish).
• Clean the surface thoroughly to be free from dirt, oil, grease etc., by blast cleaning conforming to Sa 2.5. A coat of appropriate primer is recommended.

Mixing

• Component "A" - Medium.
• Component "B" - Non-leafing aluminums paste.
• Mix 10 gms aluminium paste (Component B) in 90 ml of medium (Component A) to make 100 ml of aluminium paste standard paint. Maintain above ratio for good performance.
• Mix thoroughly for 10-15 minutes prior to use.
• Add GP Thinner is required.

Application

Apply 2 coats by brush or spray allowing 12 hours (preferably overnight) interval between coats.

General Recommendations

• Keep Container tightly closed & not easily reach to children
• When applying, it is advisable to use proper protective equipment
• Harmful if swallowed, seek medical assistance
• Flammable material
• Store in cool ventilated place