919448283538 919448283538

Galaxy Luxury Interior Emulsion Paint

Galaxy Luxury Interior Emulsion Paint

MOQ : 100 Litre

Business Type : Manufacturer, Supplier, Distributor

Product Details

Application Brush, Roller, Spray Gun
Packaging Type Can
Brand Name Surfa
Drying Time Surface Dry Within 30 Minutes
Coverage 95-100 square feet / Litre / 2 coats on puttied, primed and well dried surface
Specific Gravity 1.3 +/-1 g/cm3
Recoating Interval 4-6 hours
Resin Type Acrylic
Consistency Free flowing emulsion
Dilution Add 400ml of clean potable/municipal water to 1 Litre of paint
Recommended Film Thickness Wet: 100-140 micron, Dry: 40-45 micron
Viscosity Stormer 100-130 KU
Surface of Application Interior dry walls
Form Liquid

Preferred Buyer From

Location Anywhere in India

Surface Preparation

  • Clean the surface thoroughly, sand with Emery Paper 180 to render surface free of loose particles, flakes, dust, dirt, oil, grease etc. and wipe clean. Ensure there is no fungus or moisture on the wall.
  • On well dried and cleaned surface, apply a coat of Surfa Acrylic Cement Primer-Interior Water Based and allow to it dry for 6-8 hours.
  • Rectify the undulation. Smoothen the surface by filling dents/cracks with thin coat of Surfa Acrylic Wall Putty and allow it to dry for minimum 6-8 hrs. Sand the surface with Emery Paper 180 and wipe it clean.
  • Apply second coat of Surfa Acrylic Cement Primer-Interior-Water Based and allow it to dry for 6-8 hrs. Sand the surface with Emery Paper 320 and wipe it clean.

 

Application

  • On well dried, cleaned, puttied and primed surface, apply 2/3 coats of surfa Galaxy- Luxury Emulsion thinned with 400ml of clean potable/municipal water for one litre of paint. Leave a gap of 4-6 hours between coats.
  • Apply the paint by Brush/Roller or Spray.
  • Dark shades may require additional coat for proper hiding.
  • Do not apply surfa galaxy luxry emulsion Directly over putty as that would lead to patchy appreance
  • For Base White Tinting if required, Must Be Done Before Thinning
  • Do not over thin
  • Stir Well and Strain Before use
  • Removal of Stains/Dirt: To remove dirt/stains from painted walls, wash with water/mild soap solution (avoid detergents), after one month of painting (minimum). Tips Wipe the affected area with a clean and dry cloth to remove solid particles from the wall.
  • For regular household stains like pencils, tea, coffee, etc., use 5% soap solution. For stains like turmeric, sketch pen, etc., use a mild dish wash solution (e.g. Pril vim liquid etc).
  • For tough stains like pickle, shoe polish, crayons, oil etc., wipe the surface gently with sponge soaked with Mineral Terpentine.
  • Do not use Liquid Bleach to remove stains.
  • Use a soft cloth or sponge soaked with soap solution to remove stains- rubbing gently in a circular motion. Then, immediately wipe it with water using clean sponge to prevent stains from spreading.
  • Once the stain is removed, wipe the wall with a clean dry cloth.

 

Safety, Health & Environmental Information

  • Keep out of reach of children and away from food, drink and animal feed.
  • Apply in well ventilated areas. Do not breathe vapour or spray.
  • Do not pour leftover paint down drains or in water courses.
  • Contain spillage using sand or earth.
  • Store container in an upright position with light tightly closed, in a cool and dry place.
  • (Information in this leaflet is given in good faith but without warranty)
Read More...


Yes! I am interested

Submit Your Requirement





Looking for "Galaxy Luxury Interior Emulsion Paint" ?


1 LTR-20 LTR