Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

Need Help? Chat with us

Cement Primer

MOQ : 100 Litre

Business Type : Manufacturer, Supplier, Distributor

Product Details

Brand Name Surfa
Main Raw Material Acrylic
Solid Content 57%
Coats Required 1 Coat
Shelf Life 12 Months
Colour White
Specific Gravity 1.35 +- 0.2 g/cm3
Viscosity in KU 110 +- 10 KU (Stormer)
Thinning Mix 900 ml of clean potable water with 1 Litre of Inex Primer
Coverage 100 square feet / Litre depending on surface condition and porosity
Surface Drying Time 20-30 minutes
Dry for Recoating 4 hours
Method Of Application Spray, Roller, Brush
Finish Smooth & Matt
Packaging Type Bucket
Storage Store in cool dry place

Preferred Buyer From

Location Anywhere in India

Benefits

  • Unique 2 in 1 formulation
  • Superior whiteness
  • Alkali resistance
  • Good hiding
  • Excellent coverage
  • No added lead, mercury and chromium
Read More...


Yes! I am interested


MOQ : 100 Litre

Business Type : Manufacturer, Supplier, Distributor

Product Details

Type Water Based Cement Primer
Brand Name Surfa
Form Liquid
Packaging Type Plastic Bucket
Coverage Approximately 140 to 150 Sq. Ft. per liter per single coat depending on porosity and surface
Hard Dry Within 5- 6 hours
Coats Required 1 Coat
Thinning To be thinned with clean potable water to obtain brushing consistency in the ratio of primer water
Recommended For Use as a Primer Over Exterior Surfaces Which are to Be Coated with Acrylic Based Exterior Emulsion

Preferred Buyer From

Location Anywhere in India

Surfa Acrylic Primer - Exterior is an acrylic based product suitable for exterior use. This is a water based thinnable primer and pigmented white to give reasonable opacity. Its sets fast and does not require curing.

 

Directions for use

  • Surface preparation : Remove dust, dirt, grease and loose flaky paint, fungus/ algae by thorough wire brushing and cleaning with water and allow drying
  • Exterior rough surfaces previously coated with cement paint should be wire brushed and washed with water thoroughly and allowed to dry.
  • Newly plastered surfaces are to be fully cured and dried.
  • Apply single coat liberally using brush and allow drying for 4-6 hours.
  • Apply recommended number of overcoats of smooth emulsion or textured paint.
Read More...


Yes! I am interested


MOQ : 100 Litre

Business Type : Manufacturer, Supplier, Distributor

Product Details

Brand Name Surfa
Main Raw Material Acrylic
Primer Base Type Water Based
Coats Required 1 Coat
Coverage (Sq. feet) 90 sqft per ltr single coat
Viscosity 90 sec. (Ford Cup at 30 Degree C)
Thinner Clean potable water for Surfalac water-base cement primer, GP Thinner for Surfalac A/R quality oil
Surface Drying Time 6 Hours
Areas of Application Fully Matured Interior Wall, Concrete, Brick Work and Asbestos Surfaces
Shelf Life 12 Months
Packaging Type Bucket
Form Liquid
Storage Store in cool dry place
Colour White
Method of Application Brush / Spray/ Roller

Preferred Buyer From

Location Anywhere in India
  • Surfalac Cement Primers are excellent Cement primers formulated to resist alkali attack and dampness. These primers may be used on fully matured interior plaster walls as priming coat for any wall coating or synthetic enamel. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour.
  • These primers are fast drying and alkali resistant.
  • These primers are easy to apply by brush and give a smooth matt finish.
  • Surfalac Cement Primer is available in both water and solvent thinnable formulations.

 

Directions for use

  • Clean the surface thoroughly and make it free from dust, dirt, flakes, grease and other loose particles.
  • Surface should be dry cut with emery paper and cleaned before finishing coats are applied.
  • Apply 1 or 2 coats, as required. Allow at least 6 hrs in between coats.
  • Stir Well Before Use
Read More...


Yes! I am interested


MOQ : 100 Litre

Business Type : Manufacturer, Supplier, Distributor

Product Details

Type Water Based Cement Primer
Brand Name Surfa
Color White
Form Liquid
Packaging Type Plastic Bucket
Areas of Application Fully matured interior wall, concrete, brick work and asbestos surfaces.
Viscosity 90 sec. (Ford Cup at 30 Degree C)
Coverage 150 Sq.Ft. per liter single coat depending
Surface Drying Time 6 Hours
Thinner Clean potable water for Surfalac water-base cement primer, GP Thinner for Surfalac A/R quality oil
Method of Application By Brush

Preferred Buyer From

Location Anywhere in India

Coral Cement Primers are excellent cement primers formulated to resist alkali attack and dampness. These primers may be used on fully matured interior plaster walls as priming coat for any wall coating or synthetic enamel. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour.

 

These primers are fast drying and alkali resistant. These primers are easy to apply by brush and give a smooth matt finish. It is available in both water and solvent thinnable formulations.

 

Cement Primers are formulated to resist alkali attack and dampness. These primers may be used on fully matured interior plaster walls as priming coat for any wall coating or synthetic enamel. It may also be used before repainting a wall of a different colour to ensure obliteration of the existing colour.

  • These primers are fast drying and alkali resistant.
  • These primers are easy to apply by brush and give a smooth matt finish.
  • Cement Primer is available in both water and solvent thinnable formulations.
Read More...


Yes! I am interested


MOQ : 100 Litre

Business Type : Manufacturer, Supplier

Product Details

Type Water Based Cement Primer
Brand Name Surfa
Color White
Form Liquid
Packaging Type Plastic Bucket
Recommended Use as a primer over exterior surfaces which are to be coated with acrylic based exterior emulsion
Thinning To be thinned with clean potable water to obtain brushing consistency in the ratio of primer water
Drying Within 6 hours
Coverage 150 Sq.Ft. per liter single coat depending

Preferred Buyer From

Location Anywhere in India

Coral Acrylic Exterior Cement Primer is an acrylic based product suitable for exterior use. This is a water based thinnable primer and pigmented white to give reasonable opacity. Its sets fast and does not require curing.

 

Directions for use

  • Surface preparation: Remove dust, dirt, grease and loose flaky paint, fungus/ algae by thorough wire brushing and cleaning with water and allow drying.
  • Exterior rough surfaces previously coated with cement paint should be wire brushed and washed with water thoroughly and allowed to dry.
  • Newly plastered surfaces are to be fully cured and dried.
  • Apply single coat liberally using brush and allow drying for 4-6 hours.
  • Apply recommended number of overcoats of smooth emulsion or textured paint.
Read More...


Yes! I am interested



Looking for Product Name ?